PROIZVODI
- OBRADA UNUTRAŠNJIH ZIDOVA
- PROIZVODI ZA TERMOIZOLACIJU
- OBRADA SPOLJAŠNJIH ZIDOVA
- PROGRAM ZA KERAMIKU
- LIJEPKOVI ZA DRVO I PARKET
- BOJE I PREMAZI ZA DRVO
- GIPSARSKI RADOVI
- MAŠINSKI MALTERI
- HIDROIZOLACIJA
- BOJE
- UNUTRAŠNJE BOJE I DEKORATIVA
- FASADNI SISTEMI I ENERGETSKA EFIKASNOST
- ZAŠTITA ZA DRVO I METAL
- HIDROIZOLACIJA I UGRADNJA KERAMIKE
- ZAŠTITA BETONA
- EPS
Vintage
BOJE
Vintage is an interior decorative paint from the Antiche Terre Fiorentine line that grew out of the decorative paint we call Original.
It contains different coloured floccules and is available in 8 base colours: Vanilla, Coral, Amber, Sea Breeze, Rosé, Lagoon, Parchment and Forest. These bases also contain a small amount of pearly micro-pigments that give the decorative paint a soft and shiny feel (the ‘Pearl Effect’).
Vintage offers a wide range of harmonious colours that allow you to create elegant shades with practically no effort at all, thanks to the ease with which this product can be applied.
Characteristics
Vintage is a decorative paint that belongs to the Classic group of products in Candis’ Antiche Terre Fiorentine line.
This product is completely water-based, semi-permeable, ecological and is made up of carefully selected raw materials. It is available in eight different colour families: Vanilla, Coral, Amber, Sea Breeze, Rosé, Lagoon, Parchment and Forest.
The painting process involves first applying a coat of Iridescent-Neutral base mixed with an appropriate ATF colour toner. Then, a brush and spatula are used to apply ATF Vintage (if necessary, mixed with a toner, as shown in the catalogue), in order to create the shades you are looking for.
In order to get the best results, the Iridescent – Neutral base (mixed with an ATF colour toner) should be applied with a paintbrush, a roller or sprayed on with a compressor. Two coats are recommended, the first diluted with 20-25% water, and the second with 15-20% water.
Preparation
Before applying the decorative paint, make sure that the previous coat of Iridescent – Neutral Base (mixed with the colour toner) is completely dry.
Pour the amount of colour toner specified in the catalogue into the tin of Vintage and carefully stir it with a spatula or a mechanical mixer until you have a homogeneous mixture.
Using a Candis ATF brush, apply the paint in a criss-cross fashion over a 1-2 m2 surface. To get the desired effect, you then need to go over the same surface with an empty paintbrush.
After 5-10 minutes (the exact time may vary depending on the weather conditions and the porosity of the surface), you can create the final touch by smoothing the wall with a Candis ATF spatula.
Then continue the same procedure over the rest of the wall surface.